Deimos_fronte_
C001_red

DEIMOS BT

Available with either 24V or 230V motors and either electromechanical or inductive limit switches.

  • Control unit with programming display and D-Track torque, speed and position management and control system in 24V versions. Incorporated dual channel radio receiver
  • Proximity limit switches for accurate, safe installations in any environmental conditions.
  • Backup battery power supply system, installable on-board unit (24V versions).

D_track_on Logo-bt_2009_on Logo-er_ready_on Logoeelinkbmap_on Logo-fastnet_on
Summary table
Declarations of conformity Instruction manuals Other documents Name of model Kit description Status
R925246 00002 - DEIMOS 300 BT KIT ITA x Operator 24V for sliding gates up to 300kg in weight. Leaf speed 13m/min. Limit switch Encoder.
P925178 00006 - DEIMOS BT PROX   Operator 24V for sliding gates up to 500kg in weight. Leaf speed 12m/min. Limit switch Induttivo.
R925228 00001 - DEIMOS BT KIT ITA x Operator 24V for sliding gates up to 500kg in weight. Leaf speed 12m/min. Limit switch Elettromeccanico.
R925236 00002 - DEIMOS BT KIT FAST NET EASY BUS   Operator 24V for sliding gates up to 500kg in weight. Leaf speed 12m/min. Limit switch Elettromeccanico.

Technical specifications

DEIMOS 300 BT KIT ITA DEIMOS BT PROX DEIMOS BT KIT ITA DEIMOS BT KIT FAST NET EASY BUS
Control unit NETTUNO S
Power supply 24 24 24 24
Power input 50 70 70 70
Pinion module 4 4 4 4
Slowdown yes yes yes yes
Impact reaction D-Track D-Track D-Track Electronic torque limiter
Locking Mechanical Mechanical Mechanical Mechanical
Release Knob with triangular key Knob with triangular key Knob with triangular key Knob with triangular key
Frequency of use Intensive Intensive Intensive Intensive
Environmental conditions (min) -15 -15 -15 -15
Environmental conditions (max) 60 60 60 60
Protection rating IP24 IP24 IP24 IP24
Actuator weight 5.6 7 7 7

Control unit characteristics

ALPHA RIGEL 5 SD NETTUNO S HQSC-D LEO D MA SD SIRIO TEL A-CTBOARD SL LEO B CBB L02 HQSC-D ARES HQSC-D 300
Motor 1 TRIF output
Motor 1 230V output
Motor 2 230V output
Motor 1 24V output
Motor 2 24V output
Single for Opening
Single for Closing
Separate Inputs for Opening
Separate Inputs for Closing
Encoder
Start E1 E1
Pedestrian Start E1
Internal Start
Open E2 E1
Close E2
Timer E1
Pedestrian Timer E1
Stop E2
Photocells E1
Photocells for Opening E2
Photocells for Closing
Photocells Inputs Check
Safety Edge E2 Opt. E1
8K2 Safety Edge
Safety Edges Inputs Check
Flashing Beacon
Courtesy Light E4
Zone Light E4
Stairs Light E5
Solenoid Lock Opt. E6
Electromagnet E6
Gate Open Warning Light E1 E7 E1 E1 E1
Second Radio Channel E1 E7 E1 E1 E1
Alarm E5
Torque Control
Obstacle Recognition
Dynamic Path Tracking
Speed Control
Slowdown Control
Speed and Slowdown Control
Brake
Opening Delay Control
Closing Delay Control
Backup Batteries Connection
ICE Function
Self Setting
Automatic Re-closing Control (TCA)
Open Pulse Blocking
TCA Pulse Blocking
Close Pulse Blocking
Photocell Trigger Setting
Fast Close
Pre-Alarm
2 Steps E8 E2 E1
3 Steps E2 E8 E3 E2 E2 E1 E1 E2 E2
4 Steps E2 E8 E3 E2 E2 E2 E1 E1 E2 E2
Deadman Feature Opt.
Closing Stop Pressure
Water Hammer
Traffic-Light Management Opt. Opt.
Accessories power supply 24V 200 mA 1000 mA 500 mA 180mA 1000 mA 1000 mA 180mA 1000 mA 180mA 180mA
Antenna
Built-in Receiver
Learning via Radio Commands
EE-Link
ER-Ready
Self-Diagnosis PRO
Statistics Management PRO PRO PRO
Central Commands Management Opt. Opt. Opt. Opt. Opt. Opt.
Conformity to EN 12453-EN12445
U-Link
Characteristic B B
Weight 2 2
LEGENDA tabella caratteristiche centrali di comando
E1 Alternating functions; one cuts out the other
E2 Alternating functions; one cuts out the other
E3 Alternating functions; one cuts out the other
E4 Alternating functions; one cuts out the other
E5 Alternating functions; one cuts out the other
E6 Alternating functions; one cuts out the other
E7 Alternating functions; one cuts out the other
E8 Alternating functions; one cuts out the other
PRO Requires PROXIMA handheld programmer
Opt. Requires optional board

Accessories

D571054 - CFZ

Galvanized steel rack for welding, 22x22 mm, 4-module, cross-section from 2 m

Acces-cfz details
N999320 - CVZ-S

Steel rack, 4-module, cross-section 30 x 8 mm, length 1 m, screw-fitted on supports (supplied)

Acces-cvz_s details
N999151 - SFD

Base plate for DEIMOS series (supplied with operator)

Acces-sfd details
P125002 - SB BAT

SB BAT emergency battery kit for DEIMOS BT

Acces-sb_bat details
P111449 - RAU

Wired connection board for BFT plug-in receivers

Acces-rau details
P111376 - SCS 1

Serial board for connection to zone and opposing leaves for control units with display While stocks last

Acces-scs1 details
P111377 - SCS 1 MA

Board for connection to more than two checked photocell copies for DEIMOS BT and ARESWhile stocks last

Acces-scs1_ma details
P111408 - SCS WIE

Board for connection to SELETTO (E) keypad and COMPASS SLIM proximity reader

Acces-scs_wie details
P111273 - CELLULA 130

Pair of CELLULA130 photocells

Acces-cellula_130 details
P111452 - CELLULA 180

Pair of orientable photocells (180°horiz./20°vert.) For external application (range 30 m). Power supply 24V ac/dc

Acces-dcw details
P111272 - CELLULA 50

Pair of built-in adjustable photocells (range 30 m) Power supply 24V ac

Acces-cellula_50 details
P111391 - CELLULA RFL

Reflective photocell for external application (range 12 m) Power supply 24V ac/dc (requires S RFLP P111409)

Acces-kit_cc_rfl details
P111400 - FLC 8K2

Interface for connecting one or more 8K2 type edges

Acces-flc_8k2 details
P111059 00001 - FLCP 2

Infrared obstacle detection device for safety edge CI, BIR C, BAR C and BAR C BA

Acces-flcp2 details
P111041 - PRC

Pneumatic relay for BIR edge with 1 pressure switch

Acces-prc details
P111042 - PRC2

Pneumatic relay for BAR edge with 2 pressure switches

Acces-prc_2 details
P111401 00001 - VENTIMIGLIA NS

VENTIMIGLIA NS infrared device for BIR C or BAR C safety edges (conforms to EN 12978 Standard)

Acces-ventimiglia_ns details
P111450 00002 - BAR C 2

Double profile rubber safety edge (L 2000 x H 60 mm)

Acces-bar_c details
P111450 00004 - BAR C 4

Double profile rubber safety edge (L 4000 x H 60 mm)

Acces-bar_c details
P111450 00006 - BAR C 6

Double profile rubber safety edge (L 6000 x H 60 mm)

Acces-bar_c details
N190104 - BIR C

BIR C rubber safety edge

Acces-bir_c details
P111050 - CM 1000

Mechanical safety edge, length 1 m

Acces-cm_1000 details
P111051 - CM 1500

Mechanical safety edge, length 1.5 m

Acces-cm_1000 details
P111052 - CM 1700

Wired sensitive edge of length 1.7 m CM 1700

Acces-cm_1000 details
P111053 - CM 2000

Mechanical safety edge, length 2 m

Acces-cm_1000 details
P111054 - CM 3000

Mechanical safety edge, length 3 m

Acces-cm_1000 details
P111055 - CM 4000

Mechanical safety edge, length 4 m

Acces-cm_1000 details
P111056 - CM 5000

Mechanical safety edge, length 5 m

Acces-cm_1000 details
P903013 - CC RFL

CELLULA RFL and S RFLP mounting support on CC posts

Acces-cc_rfl details
P903005 - CC130

Pair of CC 130 posts

Acces-cc_130 details
P903010 - PFC1

Pair of foundation plates for CC50, CC130, CSC50, CSC130 and CC130/2 posts

Acces-pfc1 details
P111399 - IT23

Connection interface for CELLULA RFL in accordance with EN12453 Standard

Acces-it23 details
D113632 - AEL 433

Antenna for 433 Mhz radio remote control with 4 m cable

Acces-ael433 details
D121501 - UNIPOWER

12Vdc power supply for Proxima

Acces-unipower details
P121016 - RB

RB 4-channel wall-mounted radio control with rolling code

Acces-rb details
D113674 00001 - CLONIX 2E 128

CLONIX 2E 433 MHZ dual channel external receiver with rolling code (to be used if there is no CLONIX receiver in the system)

Acces-clonix_2e details
D113674 00003 - CLONIX 2E 2048

Dual channel 433 MHz rolling code plug-in receiver. 2048-position memory

Acces-clonix2_2048 details
D113670 00002 - RTD 2048

Four-channel rolling code receiver with 2048 codes and built-in programming display. 230Vac power supply, radio command block progra...

Acces-rtd_ details
P121011 - INTRO

INTRO recessed key switch

Acces-intro details
D121011 - LCM

Magnetic key reader. For column mounting - see mod. CLC

Acces-lcm details
P121017 - SEK

SEK external key switch

Acces-sek details
P121012 - SELETTO

Recessed digital button panel with metal body and stainless steel keys

Acces-seletto details
P121019 - T-BOX

T-BOX radio digital keypad

Acces-tbox details
D113671 00002 - RTD CA 2048

Four-channel rolling code receiver with 2048 codes and built-in programming display. Usable with COMPASS

Acces-rtd_ca details
N733103 00002 - POX SC

Two-button panel with indicator light for SIBOX safe, for connection to control unit

Acces-pox_up details
D121611 - SPC

SPC external button panel with 2 start-stop buttons.

Acces-spc details
D121612 - SPC2

SPC2 external button panel with 2 open-close buttons.

Acces-spc2 details
D121619 - SPC3

SPC3 open stop close button panel.

Acces-spc3 details
D121613 - SPCE

SPCE external button panel with mushroom-head emergency button.

Acces-spce details
P111274 - RME 1 BT

24Vac single channel metal object detector with installation base

Acces-rme_1_bt details
P111001 00003 - RME 2

230Vac dual channel metal object detectorSupplied with RME 2 installation base

Acces-rme_2 details
D731022 - CLC

Column for magnetic key readers. Height 1 m

Acces-clc details
P111510 - U-Base

Software for bluetooth programming and managing of control unit, receiver and transmitters. USB key included

Access-ubase details
N574039 - BOX

Wall-mounted safe for steel cable release and electric control

Acces-box_chiusa_ details
D111888 - Kleio B Rca02 R1

12V two-channel transmitter 433MHz rolling code. Soft touch treatment KLEIO

Acces-kleio__b_rca_02 details
N999519 - Kleio B Rca02 R3

12V two-channel transmitter 433MHz rolling code. Soft touch treatment. Pack of 100 items, numbered for block memorisation

Acces-kleio__b_rca_02 details
D111890 - Kleio B Rca04 R1

12V four-channel transmitter 433MHz rolling code. Soft touch treatment KLEIO

Acces-kleio__b_rca_04 details
N999520 - Kleio B Rca04 R3

12V four-channel transmitter 433MHz rolling code. Soft touch treatment. Pack of 100 items, numbered for block memorisation

Acces-kleio__b_rca_04 details
D111904 - Mitto B Rcb 02 R1

12V two-channel transmitter 433MHz rolling code

Acces-mitto__b_rcb_02 details
D111905 - Mitto B Rcb 02 R2

12V two-channel transmitter 433MHz, copyable with rolling code

Acces-mitto__b_rcb_02 details
N999542 - Mitto B Rcb 02 R3

12V two-channel transmitter 433MHz rolling code. Pack of 100 items, numbered for block memorisation

Acces-mitto__b_rcb_02 details
D111906 - Mitto B Rcb 04 R1

12V four-channel transmitter 433MHz rolling code

Acces-mitto__b_rcb_04 details
D111907 - Mitto B Rcb 04 R2

12V four-channel transmitter 433MHz, copyable with rolling code

Acces-mitto__b_rcb_04 details
N999543 - Mitto B Rcb 04 R3

12V four-channel transmitter 433MHz rolling code. Pack of 100 items, numbered for block memorisation

Acces-mitto__b_rcb_04 details
D111945 - MITTO B RCB 04 R1 VINEYARD

12V four-channel 433 MHz rolling code transmitter. Vineyard Red colour

Acces-mitto_b_rcb_04_r1_vineyard details
D111946 - MITTO B RCB 04 R1 SUNRISE

12V four-channel 433 MHz rolling code transmitter. Sunrise Yellow colour

Acces-mitto_b_rcb_04_r1_sunrise details
D111947 - MITTO B RCB 04 R1 CLEAR ICE

12V four-channel 433 MHz rolling code transmitter. Clear Ice White colour

Acces-mitto_b_rcb_04_r1_clear_ice details
D113746 00003 - GSM RECEIVER

GSM receiver. Enables the operation of an automation system with a free phone call

Acces-gsm_receiver details
D113748 00003 - RADIUS B LTA 24 R1

Flashing beacon with built-in antenna for 24V motors

Lampeggiante_def details
D113749 00003 - RADIUS B LTA 24 R2

Flashing beacon without built-in antenna for 24V motors

Lampeggiante_def details
P111528 - THEA A15 O.PF

Pair of orientable photocells with integrated flashing beaconBeam can be oriented 40° horizontally and 10° vertically.Synchronised i...

Acces-thea_b_fca_2_15_b01_ details
P111536 - AKTA A30

Pair of orientable photocells (180°horiz./20°vert.). For external application (range 30m). 24V ac/dc

Acces-akta_eris details
P111526 - THEA A15

Pair of self-aligning photocells for external application (range 30m). Power supply 24V ac/dc

Acces-thea_b_fca_2_15_b01_ details
P111537 - ERIS A30

Pair of wireless photocells with the possibility of managing an active infrared or resistive sensitive edge.

Acces-akta_eris details
P111512 - TANGO B DSB 4.30 B01

Wireless photocell with possibility of managing infrared or resistive safety edge

Acces-dcw details
P111527 - THEA A15 O

Pair of orientable (40°horiz./10° vert.) and synchronised photocells for external application (range 30m). Power supply 24V ac/dc

Acces-thea_b_fca_2_15_b01_ details

Promotions

Interested in this product? Browse through the Bft promotions to discover the latest offers on this product!

Distribution

Interested in this product? Find your nearest Distributor or specialist Installer!

Bft Configurator

Login or register